Chip Grabbing Test Equipment (With PPT Equipment Flow Explanation) SolidWorks, 3D Exported

Chip set using Tray feeding two groups of switching uninterrupted feeding, 3-axis XYZ module equipped with two-way pitch module adsorption products, pitch into the test group after testing, automatically divided into OK/NG.
Chip gripping test equipment (with PPT equipment process explanation) operation introduction:

1. manually put into the circuit board, the inner cavity guide positioning;

2. manually put into the chip Tray two groups;

3. photoelectric detection of the material into position, the equipment is ready, manual button to start the equipment;

4. discharge under the pressure plate to move to avoid the position, the nozzle variable distance move to Tray to absorb the material, variable distance after the downward pressure into the circuit board;

5. unloading and Replace the material prompt;

6. empty Tray take out, put in new material Tray, another tray number position equipment memory;

7. put material position every two rows can be single selection.