Automatic Packaging Line-Packing Sorting And Stacking Equipment Line SolidWorks

Automatic packaging line

1, PCB board by manual by the placement position, evenly put material; through the CCD photo identification to reach the designated material location into the small line body; then through the mechanical arm clamping for detection, detection is complete, NG products placed in the bad products put into the box, manual processing, OK products placed in, flip the line body for flip operation; flip completed, through the cylinder clamping, transported to the boxing position, in turn into the carton After the boxing is completed, the box is sealed through the packing machine designation; finally, the robot arm will be packed cartons sorted and stacked on the cardboard.

2?€?By the adoption of six-axis robot greatly improves the working efficiency, compact structure saves space.

PCB board 90 ?? flip board through the pick-up claw clamping, the PCB board from the flip line body, horizontal transport to the boxing position, boxing before the propping module will be propped up knife card, and then the propping module will be removed after the insertion of the board; sliding platform can be placed on 1-2 packaging boxes, packaging boxes first by the middle block cylinder block, insert the first row of PCB board, and then the middle block cylinder down, the motor will push the packaging boxes to the rear limit Then the middle blocking cylinder descends and the motor pushes the box to the rear limit position to load the second row of PCB boards; when the insertion is finished, the push box cylinder pushes the filled box to the roller conveyor line to send the box out for the next packing process.