Auto Sunroof Undercoating Workstation 3D Digital Model + BOM + Design Manual SolidWorks, 3D Exported

Auto sunroof primer workstation process flow: pick up the glass piece – glass placed on the tray – appearance check – pick up the cleaning bottle – clean the glass – put back the cleaning bottle – wipe the cleaning agent – discard the wipe paper – pick up the primer bottle – glass coated with primer – put back the primer bottle – wipe off the primer on the probe hole – stick the process label – suction cup move to the next workstation

A basic function.

Function: A work table with a rotatable tray to hold a single piece of glass, and can complete glass inspection, cleaning, primer coating operations, with exhaust / extraction interface

Error-proof function: 1.
1. Cleaner and primer use order
2. Felt head counting
3. Dispensing bottle timing

III. Operators
1. The number of operators is 1 person
2. Working form – standing operation

IV. Durability
1.Continuous use time – 24H/day
2.Durable years – more than 10 years

V. Capability
1.Total cycle time –< 45 sec 2.Manual operation time -< 45 sec 3. Product switching tooling adjustment time -< 1 min (height adjustment, width adjustment support) VI. Working environment 1.Noise level - below 70dB from the noise level to 1m away 2. Stimulating gas - chemical gases such as butanone are discharged from the air duct Seven, power specifications 1. Power supply specification - single-phase 220V 50Hz 2. Air source specification - 6 ?? 1 Kg/cm2