UV Dispensing And Curing Machine Equipment (Display Automatic Dispensing, UV Curing Assembly Line) SolidWorks

UV dispensing and curing machine 3D assembly drawing SW design source file

UV dispensing and curing machine Introduction of automated equipment to achieve automatic dispensing and UV curing of displays to improve production capacity and save manpower.
Brief description of action process
Start the system, adjust the conveyor speed, adjust the material width, and select the corresponding program.
Employees manually put the workpiece on the upper conveyor belt conveyor slot.
After the workpiece flows to the adjustment frame, the workpiece will be precisely positioned and the machine will finish the dispensing operation.
After dispensing is completed, the workpiece flows to the leveling section for glue leveling.
The leveled workpiece flows into the UV module for UV curing.
After the light curing is completed, the workpiece flows to the turning position, where the turning mechanism turns the workpiece 180?? and sends the workpiece to the No. 2 conveyor belt.
The workpiece will also complete the dispensing and UV curing operation on the No. 2 conveyor belt, and the process is the same as the No. 1 line process.
When the light curing is finished, the workpiece will flow to the down position and the workpiece will be taken away manually. Cycle the above action