Tie Detection Automatic Packaging (PPT Detailing The Action Flow) SolidWorks, 3D Exported

Automatic Tie Detection Packaging Machine Two groups of vibrations are switched to supply material respectively, counting and dividing CCD detects whether the internal injection chuck of the head of the tie is short of material, and the lower CCD detects whether the tail of the tie is short of material, counting and packing.

Tie detection automatic packaging machine operation profile.

1. manually put in the circuit board, the inner cavity guide positioning.

2. manually put in the chip Tray two groups.

3. photoelectric detection of the material in place, the equipment is ready, the manual button to start the equipment.

4. the lower pressure plate moves to avoid the position, the nozzle moves to the Tray to absorb the material, after the distance is changed, the lower pressure is loaded into the circuit board.

5. unloading and replacement of material tips.

6. empty Tray out, put in new material Tray, another tray number position equipment memory;.

7. put the material position of each two rows can be single selection.