Punch Down Machine Mechanical Drawings + Overall Process Description Of The Equipment SolidWorks

Taito punch down machine Overall process of equipment.

1?€?Stamping products automatically flow to the discharge belt line (the discharge belt line can be adjusted according to the products and telescoped).

2?€?Defective camera automatically takes pictures, positioning camera locates the direction of the product, encoder calculates the distance the product moves, and the data is transmitted to the controller.

3?€?According to the above data, the parallel robot precisely locates the moving products and uses electromagnets to suck the products, NG products are put on NG belt and ok products are put on wide belt, while aligning the products, 4 to 5 for large products and 5 to 6 for small products.

4. The wide belt moves the products to the 6-axis robot station.

Anti-slip wide belt to prevent the products from sliding in moving.

The 6-axis robot uses electromagnet to suck the 4 large products

The 6-axis robot uses electromagnets to suck the four large products and put them into the receiving basket at the same time.

The 6-axis robot does not stop, put the full collection basket A, and continue to put the collection basket B.

5?€?Use the counting function to detect whether the receiving basket is full of products, if it is full, use the floor rail to move to the aisle automatically, forklift fork away and put the empty basket.

6?€?The 6-axis robot does not stop and so on.