Non-Standard 18650 Battery Cell Automatic Peeling Machine, 18650 Cylindrical Battery Peeling Equipment SolidWorks, 3D Exported

Machine name: 18650 cylindrical battery cell automatic cutting and peeling equipment equipment work principle introduction of this equipment is applicable to products: 18650 battery cell, 26650, cylindrical mobile power batteries, automotive power batteries and other cylindrical battery cell peeling. The equipment is mainly a new energy power battery automatic peeling loading and unloading equipment: a full set of drawings decompression has more than 100MB, the total machine has more than 200 parts, the equipment is mainly through the way of thermal cutting for cylindrical core peeling, first of all, the manual core into the feeding conveyor belt, robotic gripping the core into the peeling section conveyor belt, according to the production speed to choose which conveyor belt into the core through the conveyor belt The cell enters the peeling jig through the conveyor belt. When the battery enters the cutter jig, the cutter rotates, clamping the core structure clamps the core by the cutter to cut the skin of the core, and then clip the scrap robot clamps the peeled green paper, which is what we call scrap, the peeled skin of the core is automatically sent out from the discharge conveyor belt, the manual straight collection of material box can be, the principle of peeling is that the core is stationary by the stepping electric drive cutter jig rotation, the cutter is heated state High-speed rotation and cutting of the outer skin of the core, cutting accuracy of 0.1MM, the equipment for three channels an hour capacity of about 7000-8000, so this peeling structure and speed can basically meet the needs of most customers in the current market, the front and rear end of the equipment loading and unloading can be increased automatically, according to the cost of adjustment, manual or automatic loading and unloading function, the internal cutter structure picture also Can be seen more complex, of course, want to understand more according to the body of the structure of the design, you need to download and slowly learn, a full set of complete drawings, if you need or interested in friends are welcome to download and learn, the above is the full structure of this equipment and working principle. IV. The main technical parameters: Category specifications parameters machine size: 1350 * 1220 * 1700MM (L * W * H) input voltage: AC-220V50Hz or AC-380V 50Hz optional machine maximum power: 0.9K W (220V) input gas source pressure: 0.4-0.6 Mpa gas consumption : 1.5 L/min production efficiency (C/T) : ???1.0 S / a equipment loading rate : ???95% processing mode : automatic detection, automatic peeling, automatic material change mode : manual discharge