Electric Display Vernier Caliper Dispensing Machine SolidWorks, eDrawings

Technical requirements for electric card dispensing and pressing equipment

1. Workbench: a. The workbench of dispensing and pressing equipment is disc type, with center positioning and can be rotated around.

b, the disk table around a balanced layout of 6 press jigs (for 6-station operation), the table can automatically lock every 60 degrees of rotation, to maintain the stop state, open the lock for manual control.
2, caliper dispensing machine, automatic dispensing fixture: fixture pressure surface for a slight soft rubber, rubber longitudinal section for the pressure surface semi-circular arc, to ensure that the flexible surface pressure and glue can be spread from the middle to both sides.

3, dispensing valve: glue valve for instantaneous dry glue (Loctite 480), the amount of adjustable glue, glue valve after spraying the needle can not be plugged within 2 hours, the table fixed a small liquid holding container, glue valve stop using, the needle can probe into the container. After the glue valve stops using, the needle can be poked into the liquid of the container to keep the glue inside the needle from solidifying.
Electronic Vernier Caliper Dispensing Machine