Cover Front Strip Punching And Cutting Integrated Machine SolidWorks

This equipment mechanism is designed by SW2016 including parts features can be edited. Adaptation range: applicable to diameter ???4 ~ ???22mm, shell length 8 ~ 40mm, test voltage from 0V ~ 5VDC. test items: ESR (1KHz) fixed current pulse charge charging 60s charging voltage. Test process: the container will be fed by vibrating material tray, moved to the test conveyor chain by flat feeding and robotic handover feeding. Then do polarity detection, stepper motor for automatic commutation. The test voltage is greater than 20mV product into the re-testing material box. Test the equivalent series resistance ESR (frequency 1KHz, apply 1mA or 10mA current, detect the voltage V at the end of the container). The internal resistance test instrument records the measured ESR graded interval (high ESR, low ESR.) The ESR is bad directly under the material, then detect the open circuit and short circuit, and enter the open circuit and short circuit material box. Constant current charging current can be set. Will pulse charge 60s??0.1s in the test chain. conduct voltage test at the end of the container; voltage unqualified products into the bad voltage magazine. Then enter the load discharge and short-circuit discharge section, six kinds are put into the corresponding material box. Shaker feeding system Power supply single-phase AC220V,50/60Hz Open-circuit short-circuit detection detection power supply DC0V-5V10A 60s charging voltage detection Single-way constant current setting range: 0.01A-5A can be set, accuracy <1%; charging time: 60s??0.1s; display set value; voltage test accuracy: display value ??1%; ESR test Test range 0.0001??-999.99M??; automatic shift from set value upper limit m??,??,K??,M??; display mode: LCD display Accuracy: display value ??1%; setting mode: can set sub-grade interval, display set value. STP format is included.