Automatic Catheter Inspection Machine 3D Digital Model + BOM + Design Manual SolidWorks, 3D Exported

Automatic catheter testing machine machine functions.

1?€?Automatic feeding system: Pour the catheter into the large funnel, and gradually send a small amount of products to the slot of the insert loading machine through the vibration wave; the insert loading machine will send the products to the conveyor belt horizontally one by one.

2, the top CCD1 detection, that is: the size detection of A, B, C, D, E, F, G in the attached “inspection content description chart”.

3, side CCD2, CCD3 detection, respectively, used to measure the inner diameter, outer diameter, surface indentation, lack of material detection, vision system with automatic faceting function, that is: H, I, J detection in the annex “test content description chart”.

4?€?Separation inspection system for discharge: After the software determines the properties of the conduit, the PLC electrical control system will discharge the current products according to the properties of the current products (good/scrap) recorded in the software, and the qualified products will be discharged to the qualified outlet, and the defective products will be discharged to the defective outlet. The system is set up with two good product outlets/one defective outlet/one pending inspection outlet; the outlet height is in line with the later packaging machine interface standards.

Inside, design manual + BOM + original file + neutral format