ACF Anisotropic Conductive Film Slitting Machine 3D + Engineering Drawings + List BOM SolidWorks, AutoCAD, 3D Exported
ACF anisotropic conductive film slitting machine description.
1??Voltage: AC 220V single-phase 50Hz.
2, power: ??? 1KW.
3??Air pressure: 0.5~0.7Mpa.
4, noise: ??? 75dB.
5??Weight: 600KG.
6??Size of machine: L1400mmxW1000mmxH1950mm.
1??Automatic material discharge, the inner diameter of the barrel is ??75MM, the thickness of the rolled material is 0.15MM, the width of the material is 50MM, it can accommodate the space of the material length of 200 meters.
2??The cutting knife is required to slice the roll material into 16 strips of 2.0MM??0.05MM, and there should be no obvious segment difference of gross times visible to the naked eye, and the slitting must be thorough. The fluctuation or snake deviation within each meter is not more than 0.1MM.
3, cutting knife service life of not less than 3000 hours, easy and convenient to replace, 2 people operating no more than 2H, including knife time. Knife pairing can not be greater than 20 minutes, each knife pairing can run at least 50H.
4. Including drawings and standard parts list
Specification: ACF Anisotropic Conductive Film Slitting Machine 3D + Engineering Drawings + List BOM SolidWorks, AutoCAD, 3D Exported
|
User Reviews
Be the first to review “ACF Anisotropic Conductive Film Slitting Machine 3D + Engineering Drawings + List BOM SolidWorks, AutoCAD, 3D Exported”
You must be logged in to post a review.
There are no reviews yet.