TTI Non-Standard Automatic Assembly Bearing Press-In Machine (With BOM List) Bearing Beer Press Equipment Bearing Assembly Machine SolidWorks, 3D Exported

Bearing beer pressing equipment bearing assembly machine TTI non-standard automatic assembly bearing press-in machine (with BOM list) bearing hardware automatic assembly machine, this set of bearings and hardware cover assembled together equipment, belongs to the assembly type of automation machine, the main working principle of the equipment is, the left right two sides of the feed in the middle of the processing behind the lower material station, first of all, the left bearing loading position, the bearing stacked up the bottom of the material division The right side is also the same, the right side is used to install hardware products, that is, the parts need to be assembled with the bearings, also the same stacked loading, the front of the pick-up robot first take the bearings, the bearings into the middle of the jig and then to the right side of the pick-up position Dun hardware, and then put the two parts together, through the middle of the large cylinder for pressing together, each installed by the back of the pick-up cylinder to take the product away This way of operation to meet the needs and at the same time is the simplest method, the design ideas are very good so the complete set of diagrams uploaded to facilitate learning, like welcome to enter the home page to download more original and good drawings Thank you!