Power Receiver Composite Die Composite Die Design SolidWorks, AutoCAD, 3D Exported
Material: 08 steel Material thickness: 2.0mm Lot size: large quantity Unannotated dimensional tolerance IT6
This set of mould is a composite mould for connecting electric piece, the drawing includes CAD assembly drawing and parts drawing, UG three-dimensional drawing, the drawing parts are complete and the drawing is standard.
1. The convex die is installed by press-in type, and the convex die is ground flat first and then connected to the pad.
2. The guide sleeve and the guide column are gap fit H7/h6, when pressing in, pay attention to correct the verticality of the guide column, guide sleeve and template; the distance between the fixed end face of the assembled guide column, guide sleeve and the upper and lower die base plane is 1~3mm.
3. the guide pillar and the lower mold seat for the interference fit H7/r6; guide sleeve and the upper mold seat for H7/r6.
Specification: Power Receiver Composite Die Composite Die Design SolidWorks, AutoCAD, 3D Exported
|
User Reviews
Be the first to review “Power Receiver Composite Die Composite Die Design SolidWorks, AutoCAD, 3D Exported”
You must be logged in to post a review.
There are no reviews yet.