PCB Circuit Board ICT-FCT Functional Test Automation Line SolidWorks, 3D Exported

PCB circuit board FCT function test automation line is the electronic factory automation unmanned production line test and inspection machine assembly line. The unmanned automatic test line, in the electronics factory can be universal so PCB board and the various functions of the test, the equipment is a total of about 10 meters long, which has more than 50 ordinary motors, more than 30 cylinders stepping motor more than 10, dozens of filament slides composed of line structure is relatively complex, other functions include: PCB circuit ICT FCT bad test, circuit board short-circuit fault, capacitance inductance of Some high-voltage test, etc., the line body consists of four sections, respectively, PCB on the board machine to the splice table to send the board board and then to the line body test machine, under the material splice table, under the board machine four parts of the line, mainly to introduce the test machine, because the test machine is a double-layer here only the bottom layer can work, the upper layer needs to be used if the front and rear of the two splice tables can be replaced by a lift to achieve simultaneous operation up and down, in addition ICT equipment on the conveyor belt driven by the cylinder the whole set of belt line and PCB down to the bottom of the test pin board so that the PCB board solder joints all and probe contact to start testing, while the PCB board above the cylinder also down to the board pressure in place for testing, a few seconds over the test completed cylinder driven conveyor belt up to the original position, that the test is complete PCB board began to flow into the next station FCT test high voltage resistance, etc. parameters, through the lift to the circuit board to FCT test machine, FCT is divided into the upper and lower two layers of simultaneous operation test efficiency is quite high, the total height of the two peripheral automatic lift for more than 2 meters, it is mainly in the test machine at both ends of the PCB board transport and lift cycle use, etc., test OK after the product out of the line body into the board collector, the total set of equipment structure stable cost bottom, the assembly line full set of drawings complete download The complete set of drawings of the assembly line can be viewed and edited directly after the content modification, etc. Also contains ICT automatic test machine BOM.xls, welcome friends who like to download to learn from.