Network Port Test Cable SolidWorks

This equipment is a fully automatic equipment for mesh port test line, which contains high pressure test, comprehensive test, pin position degree, verticality, height difference detection, and flat angle test. It consists of pallet storage mechanism, loading three-axis robot, high pressure testing mechanism, transfer robot, comprehensive testing mechanism, flat angle testing mechanism, discharging three-axis robot, and pallet discharging storage mechanism. The specific action is to manually put the pallet of loaded products on the loading pallet storage mechanism, the loading three-axis manipulator takes out the mesh in turn and moves to the high pressure test fixture, the cylinder of the high pressure test mechanism is pushed out, the loaded raw products move to the test position for high pressure test, complete and return to the original point, if the NG products are transferred to the NG cache mechanism by the transfer manipulator, the OK products are moved to the comprehensive test mechanism for comprehensive test If the NG product is transferred to the NG cache mechanism, the OK product is transferred to the product transfer mechanism. 3D test mechanism transfer robot picks up the product after scanning the pins by the 3D test mechanism and moves it to the first jig of the flat angle test mechanism, the cylinder of the flat angle test mechanism moves the product to the first CCD test position, the next product is placed on the second jig, after the first CCD test is completed. After the first CCD test is finished, the cylinder will move the second jig to the second CCD test position, and take the first jig to put the product on the lower material transfer mechanism. The three axes robot will put the products on the pallet storage mechanism in turn.