Multiple Screws Simultaneous Inspection Mixed CCD Vision Inspection Packaging Machine SolidWorks, 3D Exported
The CCD vision inspection and packaging machine is used to inspect multiple screws at the same time and to mix and pack them according to the set quantity. Widely used in maintenance kits for screw mixing. Workflow: The screws are discharged from the vibrating disk, rotated to the inspection post, and detected by two cameras mounted horizontally/vertically for head height, head width, head outer diameter, total length, tooth pitch, tooth outer diameter, multiple gaskets, few gaskets, cross slots, one slot, etc. After detection, the OK products enter the storage box, and after receiving the signal from the climbing conveyor line, the OK products are released into the climbing conveyor line according to the set quantity, and then sent to the vertical packaging machine by the climbing conveyor line. Send to vertical packaging machine for packaging.
Specification: Multiple Screws Simultaneous Inspection Mixed CCD Vision Inspection Packaging Machine SolidWorks, 3D Exported
|
User Reviews
Be the first to review “Multiple Screws Simultaneous Inspection Mixed CCD Vision Inspection Packaging Machine SolidWorks, 3D Exported”
You must be logged in to post a review.
There are no reviews yet.