Gantry Type 3-Axis Module Scratch Non-Standard Testing Machine SolidWorks, AutoCAD, 3D Exported

A very good gantry type three axis module scratch non-standard test machine 3D model, this equipment is used for the surface hardness test of the copper tube of the condenser of the refrigerator, the alloy steel scraper is installed in the Z axis, descending to the surface of the copper tube, the front and rear axes start to move slowly, scratching the copper tube, judging whether it is qualified according to the scratch depth. This equipment is controlled by industrial control machine, the drive system is all servo motor plus planetary reducer, Z axis and left and right axis are screw, front and rear axis are synchronous belt, with very classic transmission and drive mechanism design. The drawings are complete and can be directly out of the diagram (to out of the physical equipment). Contains parameters can be edited, the format is SW2010, welcome to download for reference.
Scratching needle: Figure 102 in GB4706.13 shows the structural design with a mechanism that follows the change of the surface of the sample to be measured.
Control system: industrial control machine, drive card, data collector, etc., to realize X, Y, Z three-axis program-controlled action and fully automatic completion of one-way sequential scratching action.
Sensor: vertical force: 35N??3N; parallel force: <250N, through the sensor, is time display, monitoring, storage data. Gliding rate: through the servo motor, large proportional reducer to achieve smooth and reliable speed operation 1mm / s, speed can be set. The drawing contains 3D model SW source file + part of CAD drawings + BOM list.xls + bill of materials.xls, welcome to download.