Cell Phone Utmc Automatic Processing Line (Cell Phone Processing Automatic Unmanned Production Line) SolidWorks

A cell phone utmc automatic processing line 3D drawings to provide, other sites sell 500 yuan, share in the open drawer network is to see the open drawer network of affordable and sincere, one-time payment permanent download, I hope the open drawer network www.386600.com??????????????????. It is recommended to use Solidworks 2012 and above to open. It is worth recommending! The fully automatic and unmanned production line for cell phone processing. Cell phone processing line equipment drawings, this is a fully automatic unmanned production line, the total length of the line is more than 16 meters long, the line structure and design style are based on the way of Japanese automated production lines and design, each station and each machine of the line is an individual unit, the total line is all from the individual unit rack structure assembled into a line, however, each unit or each machine failure, you can always The entire line is 16 meters long and is controlled by each structure and each individual circuit. The circuits transmit signals to each other by means of communication, and the structure of the line can be seen from the many handling structures and racks are individually designed.
Cell phone utmc automatic processing line line total processing workflow and work station mainly by the following: conveying into the material position, detection in place, automatic pick and place material handling robot, laser cutting processing forming position, stamping and cutting, automatic spray flux, 180 degrees rotation automatic sticky tin position, conveyor belt 90 degrees conversion position, dispensing position, CCD camera visual inspection position, automatic transport position, handling off the material robot, and Discharge conveyor. Each of these stations can be changed at any time and mutual structure to achieve their desired effect, some customers have different needs, but the processing stations are also different, thus requiring a new design or change the structure, then with this line only need to make small changes to make it into another automatic production line, or into the automated assembly line you want, why say so? Because no matter what kind of production line, it is the only thing that can remain the same is the structure of the line and handling robot, usually just some processing stations are not the same, some are required to play screws, dispensing, labeling or other, so this line is very good to learn and learn from the transformation of the drawings hope that friends who need to download, from which you can get design inspiration, cleverly applied to the design to make up for their The design is not enough.