A Kind Of Double-Sided Adhesive Equipment For Battery Pole Ear SolidWorks

The AGV will put the raw material frame and the empty material frame to the raw material frame and the clinker frame respectively, and the positioning cylinder will position the material frame;

2. The three axes will take out the raw material from the frame and place it on the secondary positioning, after taking 12pcs, the secondary positioning, and then the three axes will place the secondary positioning. 3. while the polishing machine is working, the three axes will take out 12pcs of raw material from the material frame and place them on the secondary positioning;

4. after the polishing machine is finished, the three axes will take out 3pcs of clinker from the polishing machine and place them on the secondary positioning. After the polishing machine is finished, the three axes will take out 3pcs of raw material from the polishing machine and place them on the secondary positioning, then take out 3pcs of raw material from the secondary positioning and place them on the polishing machine jig respectively, after this cycle 4 times, the polishing machine will work, at the same time, the three axes will take out the clinker from the secondary positioning and place it on the material frame, after that, the three axes will place the raw material from the material frame on the secondary positioning, and so on.

5. When the three axes do not pick and place raw material and clinker, the frame will be soaked in the water tank;

6. When the raw material frame is finished and the clinker frame is filled, the AGV trolley will come over and pick up the full clinker frame, place the empty raw material frame in the clinker frame position, and then place the full raw material frame it brought to the raw material frame position;