RCO Activated Carbon Adsorption And Desorption And Catalytic Combustion Equipment SolidWorks, 3D Exported

VOCs exhaust gas treatment device of activated carbon adsorption, desorption – and catalytic combustion device design drawings of activated carbon adsorption + desorption three-dimensional drawings, adsorption capacity of 40,000m3 / h, desorption capacity of 1000m3 / h, using three towers of adsorption and one tower desorption working mode. Cellular activated carbon bed + catalyst catalytic oxidation combustion device system diagram contains the front section filtration system, air duct piping, fans, system chimney, valves, equipment climbing ladders, platforms, brackets, equipment single size drawings The process is when the adsorption bed adsorption saturation, stop the main fan; close the adsorption box import and export valves. The catalytic combustion furnace will run empty and warm up for 40 minutes before starting the desorption fan to desorb the adsorption bed. The desorbed gas will first pass through the heat exchanger in the catalytic bed, then enter the preheater in the catalytic bed, and under the action of electric heater, the gas temperature will be raised to about 220???, and then pass through the catalyst, the organic material will be burned under the action of catalyst and be decomposed into CO2 and H2O to achieve the waste gas purification. Purpose