Non-Standard Conveyor Belt Overhead 2.4m Lift Elevator Conveyor Belt Machine SolidWorks

Non-standard conveyor belt high altitude 2.4 meters lift lift conveyor belt machine design drawings. The drawing is a set of aerial conveyor lift, lift height of 2.4 meters it can lift and 90 degrees conveying together operation, the lift is driven by the bottom of the high-power motor, the upper and lower each with two large chain wheel drive to ensure stable operation in the lifting process, in addition to the incoming and outgoing material direction for 90 degrees at different locations by the incoming blocking cylinder to block the carrier, when the inductor senses the need to convey the carrier to the next When the sensor senses the need to transport the carrier to the next station, the blocking cylinder returns the conveyor belt to run, there are 2 sets of conveyor belts inside this lift, one set of conveyor belt for the incoming material transport, this conveyor belt is driven by a cylinder to lift a small space, another conveyor belt for the outgoing material is responsible for the carrier jig and other tooling plate conveyor belt another line body or another station, from the picture you can see the structure of the conveyor belt is relatively complex, welcome friends who like to download and learn, such There are many more conveyor lift drawings in the home page, welcome to browse or download more conveyor belt and lift drawings in the home page