Micro Motor Assembly Machine Non-Standard Equipment – Automatic DC Motor Assembly Line SolidWorks, 3D Exported

Miniature motor assembly machine non-standard equipment, automatic DC motor assembly line 3D digital model, the automation line equipment can meet the back cover automatic riveting bearing function; due to the assembly and function of the station is very much unable to introduce now can only briefly introduce the following functions: housing automatic assembly machine, back cover riveting bearing machine, riveting bearing embossed needle structure and the existing Paul consistent, all assembly and riveting welding dispensing quality are tested The overall operation of the equipment is stable. Bearing pressure spring pressure paste without deformation warping, four riveting point crimping reliable; bearing swing force 2.8 ~ 8kgfcm; cylinder, hydraulic press need to ensure that the product riveting pressure reliable; so in the design has been very compact structure design. The position of adding glue is consistent with the sample; the rest of the position is not allowed to have glue; . No deformation or scratching is allowed after the housing is finished. . No deformation and warping of bearing pressure spring and four riveting points are reliable. Bearing swing force 2.8 ~ 8kgfcm; equipment with manual adjustment function, manual state, the machine action in the touch screen with the corresponding keys, and signal output instructions; this set of fully automatic DC motor assembly line drawings, is the needle miniature motor and the development of an unmanned automatic line, equipment for the back cover and stator housing as a whole for 1 person to operate the loading and unloading, the beat for ??? 5 seconds, single machine turnaround time ??? 5 minutes; machine is fully automatic operation, normal operation of the stator housing for 1 person to operate the loading and unloading, the beat for ??? 5 seconds, single machine turnaround time ??? 5 minutes. The machine is fully automatic operation, no manual intervention is needed under normal circumstances, loading and unloading robots have loading/unloading functions respectively, in addition, the equipment can meet the function of automatic riveting bearing, entering magnetic tile, magnetizing, welding terminal, adding glue to the shell, there are also shell, bearing, bearing pressure spring, magnetic tile, slingshot, terminal, glue automatic feeding (manual arrangement of the shell), automatic detection of magnetic flux after magnetizing the shell, and the magnetic flux after magnetizing the shell. Unqualified products need to be detected, there is a bad product detection savings mechanism, continuous bad stop alarm function and glue adding machine A, B glue stirring, mixing evenly; is a most functional motor assembly line.