FPC Cutting And Testing Machine Screen Row Line Cutting Equipment FPC Soft Row Line Cutting Machine SolidWorks, 3D Exported

FPC cutting and testing machine screen line cutting equipment FPC soft line cutting machine 3D model The equipment is a fully automatic machine for processing screen connection wiring in Apple cell phones: the equipment is mainly used for FPC soft line equal length cutting and fracture detection, the equipment for the tray feeding operation, the manual only need to put each volume of line into the feeding bit tray on time, the equipment automatically feed and can be cut in accordance with the set length. fpc cutting Testing machine cell phone screen line processing equipment a. Equipment description of the equipment for the products: FPC, FFC, FDC, all kinds of cell phone screen connection line processing cut off. The equipment is a fully automatic machine for processing screen connection wiring in Apple cell phones: the equipment is mainly used for FPC soft line of equal length cutting and fracture detection, equipment for the tray feeding operation mode, the manual only need to put each volume of line into the feeding bit tray on time, the equipment automatically feeds and can be cut according to the set length, the precision and length of the cut material by the fiber optic sensing and feeding motor encoder control, cut material precision up to 0.01, the precision is very and cut out of the line. Accuracy is very and cut out the length of the line also need to be further tested CCD vision system, this is a simple structure but very precise equipment, when the fiber optic detection of incoming material after the cutting machine will begin to automatically cut the material, cut the material by the robot to absorb the photo position for the appearance and length detection, take the material robot and the robot to work synchronously, the detection of good products to absorb the next conveyor belt, the next material before the material will be FPC stacked, the number of each stack is also in accordance with the value set by the customer for the operation, the manual only need to collect the material in the conveyor belt can be, the middle and under the material mechanical is their own design of the slide and synchronous wheel structure, so low cost and at the same time the accuracy can be guaranteed, the overall principle of action of the equipment is this, the above fully automatic working principle of this equipment. II. The main structure and precision of the equipment are as follows: 1, FPC feeding: coil material to material manual timing feeding no material equipment automatic alarm, manual material change speed automatic feeding positioning precision. 2, cutting material: automatic cutting material speed, the latest research and development according to the Japanese FPC cutting machine design modification, cutting material accuracy can be controlled within 0.02, ahead of other domestic manufacturers of cutting machine, the speed up to about 3,000 pieces of FPC per small, and there is a lack of material alarm function. 3, Detection bit: FPC cut off by the visual for further inspection of its appearance length size, etc., out of the material detection of each stack of products in the next material out of the same visual inspection, and have NG alarm function. 4, Automatic discharging: PVC conveyor belt is used for discharging each time the material conveyed is precise and does not affect the production The equipment can operate 24 hours a day. The above is the function and principle of this equipment, other more clever design structure you can download and have time to slowly learn to study, in short, this is a very good set of FPC automatic cutting machine drawings, welcome to study and research Thank you. III. Equipment performance and the main configuration: 1, cutting detection speed: about 3000 pcs / min. 2, repeat cutting accuracy: 0.02. 3, the main accessories: 1), CCD camera: German brand BASLER; 2), sensor: OMRON; 3), PLC: Japan Mitsubishi high-speed series; 4), solenoid valve: original Japanese brand; 5), control system: independent Development. 4, human-machine interface, software automatically with toolbox, developed specifically for ordinary staff convenient Microsoft Windows operating system; 5, production data report statistical functions: CPK, Plato, bad kinds of items, bad proportion and other automatic generation of functions, can provide the basis for the production workshop to improve the process; 6, testing data output system: the screening machine has data communication functions, with data output and storage functions, the software exported data can be used through the local area network. Exported data can be connected to the printer through the local area network for paper printing. IV. The main technical parameters: Category specifications parameters machine size: 1500 * 1100 * 1800MM (L * W * H) input voltage: AC-220V50Hz or AC-380V 50Hz optional machine maximum power: 1.2K W (220V) input gas source pressure: 0.4-0.6 Mpa air consumption: 1.5 L/min production efficiency (C/T): ??? 2.0 S / a equipment loading rate: ??? 95% processing mode: automatic feeding, cutting material, automatic CCD detection, automatic feeding robot movement resolution: 0.005 mm robot repeat positioning accuracy: ??? ?? 0.01 mm material change mode: manual material change programming mode: touch screen parameter modification