Engine SW Model With Oil Radiator SolidWorks

solidworks 2012 design engine with oil radiator 3D model source file share!
Including left crankcase, right crankcase, oil pump, left external oil pipe, right external oil pipe, oil radiator, characterized in that said right crankcase is provided with balance shaft bearing seat, said right crankcase is provided with oil inlet hole and oil outlet hole, said oil inlet hole is provided with first oil channel below, said first oil channel is at an acute angle of 10-20 degrees with vertical direction, said first oil channel is connected with said oil inlet hole, said first oil channel is provided with first oil plug at the end of said first oil channel, said first oil channel is provided with oil hole connected with oil channel in right crankcase, said first oil channel is provided with oil hole connected with oil channel in right crankcase. said first oil passage is provided with a first oil plug at the end of said first oil passage, said first oil passage is provided with an oil hole connected to the oil passage in the right crankcase; said second oil passage is provided along the side of said oil outlet hole in the horizontal direction, said second oil passage is connected to said oil outlet hole, said second oil passage is provided with a second oil plug at the end of said second oil passage; said third oil passage is provided below said oil outlet hole at an acute angle of 20-45 degrees from the vertical direction, said third oil passage is connected to said second oil passage, said third oil passage is connected to said oil outlet hole at an acute angle of 20-45 degrees from the vertical direction. said third oil passage is connected to said second oil passage, said third oil passage is connected to said right external oil pipe, said right external oil pipe is connected to the oil radiator; said fourth oil passage is provided on the right crankcase outside the balance shaft bearing seat at an acute angle of 30-40 degrees to the horizontal direction, said fourth oil passage is connected to said second oil passage and said upper oil groove of the right crankcase respectively; said front lifting hole on the right crankcase is provided at an acute angle of 30-40 degrees to the horizontal direction. said fifth oil passage is provided at an acute angle of 30-40 degrees from the horizontal above said right crankcase; said fifth oil passage is connected to said oil groove at one end and to said sixth oil passage at the other end, and said fifth oil passage is provided with a fifth oil plug at the end; said seventh oil passage is provided at an acute angle of 40-60 degrees from the horizontal above the front lifting hole of said left crankcase, and the center of said seventh oil passage is 12-20 mm from the center of said front lifting hole. said seventh oil passage is connected to the eighth oil passage, said eighth oil passage is connected to said sixth oil passage, said seventh oil passage is provided with a left external oil pipe at the end of said seventh oil passage, said left external oil pipe is connected to said oil radiator