CL200 Small Agricultural Four-Wheel Tractor Gearbox (Full Parametric Design) SolidWorks

CL200 small agricultural four-wheel tractor gearbox, solidworks2013 full parametric design, parts complete and accurate, including more than 110 independent components, comprehensive details. Transmission assembly CL200.37 In addition to the overall structure of the transmission, it also includes the differential assembly and drive axle housing structure. The gearbox is a 5-shaft (main shaft, intermediate shaft, reverse shaft, sub-shift shaft and steering shaft) 11-tooth (4 duplex gears, 3 pairs of normal gears, and the rest non-constant gears) type gearbox. By changing the axial position of the three axially movable gears (i.e. reverse gear, fast gear and secondary gear duplex) by the gearshift handle, so that they mesh with the corresponding gears, six different forward speeds and two different reverse speeds can be obtained. By changing the position of the reverse gear and the fast gear, three forward speeds and one reverse speed can be obtained, and this kind of speed change is called the main speed change. After changing the meshing position of the secondary gear duplex gear, the main speed change can be carried out again to obtain three different forward speeds and one reverse speed, which makes the speed gear doubled. This process of changing the speed by changing the meshing position of the secondary gear is called secondary gear. The gearbox composed of primary and secondary gears in the same box is called (3 + 1) ?? 2 composed gearbox. It has a wide range of speed regulation, high efficiency, convenient and flexible operation. Automotive Transmission Assembly CL200.37 This model has high reference value, welcome to download!