Automatic Feeding And Locking Machine SW Design SolidWorks, 3D Exported

An automatic feed locking screw carousel multi-station automated assembly equipment. Electric or pneumatic driver to lock the screws into the product locking system. Compared to the screw locking action of holding a screw in one hand and an electric or pneumatic screwdriver in the other, the automatic feed locking screw machine can free one hand out and only one hand is needed to lift the driver to align the screw hole position to lock the screw. When finished locking a screw also only need to lift the driver to align the next screw hole position to lock the screw, the machine will automatically lift the driver in the moment to transport a screw under the driver, waiting to lock the next screw, so repeat.
The automatic tightening unit of the machine includes a rotating power part and a screw introduction part. The common ways of screw introduction are blowing type and adsorption type. Generally speaking, the blowing type has better overall efficiency than the adsorption type because it works continuously and does not require head movement back and forth. However, the blowing type itself is limited by the shape and length-to-diameter ratio of the screw, and not every type of screw is suitable for the blowing type.