DK Series Wire EDM (DK7725 Wire EDM) SolidWorks

DK series wire EDM machine, prototype DK7725 wire EDM machine a wire EDM drawing reasonable design for the design of wire EDM equipment peer reference is very good. The model has: 1 total assembly, 8 sub-assemblies, more than 170 parts. The main components included in the name.
Sub-assembly details:

DK7725A-10-101 bed

DK7725A-20-001 table

DK7725A-20-201 cage

DK7725A-20-330 V-rail

DK7725A-34-001 rollers

DK7725A-38-001 wire frame

DK7725A-74A-001 a fixture
DK7725A-74B-001 Type II Fixture
Part details.
Water blocking nozzle
End cap
Rubber Sincerity
Insulation sleeve gasket
Right coupling joint
Left coupling sleeve
Gap eliminating gear piece
Guide wheel holder
Upper scale
Lower front stopper
Front guide wheel etc. ?€??€??€??€?
It is recommended to use Solidworks 2015 and above to open it, if you use a low version of the software, you can also find the “Kepa.com converter” to convert the format. Free positive ions and electrons accumulate in the field and soon form a conductive channel that is ionized. At this stage, a current is formed between the two plates. This leads to numerous collisions between the particles, forming a plasma zone that quickly rises to temperatures of 8,000 to 12,000 degrees, instantly melting some material on the surface of the two conductors.