Rittal Ps Electrical Box Cabinet SolidWorks

1, imitation Rittal PS cabinet cabinet Rittal ps electrical cabinet sheet metal cabinet 20mm from the ground 2, 2.5mm thick mounting plate, both sides have 20mm wide U-shaped bend change, so that the mounting plate strength is greater, but also easy to carry. 3, The three cable import cover plates at the bottom of the cabinet can be replaced with each other, easy to move, easy to import the cable, easy to open the hole into the line. 4, load-bearing hinge, easy to install, easy to change the cabinet door, the door can be opened 130 degrees. 5, Grounding screw. 6, Plasticized lead can be used to push the mounting plate into the cabinet from the front through the guide rail. 7, the front door with 20X20 professional square tube reinforcement, can improve the strength of the door panel. 8, The back panel can be easily installed and fixed with screws, which can be easily disassembled. 9, EMKA1225 lock, upper, middle, lower, three-point locking door panel. 10, Sealing ring: polyurethane dotted foam seal to ensure the protection level 11, Internal installation light, easy to detect and repair 12, File pocket 13, Fan and filter to ensure ventilation inside the cabinet (optional) 14, Base (optional) 15, Installation version single and double (optional) 16, Door mounting strip for easy installation of the alignment slot