Non-Standard Automatic Hot Pressing And Shaping Machine By Mechanical Hand SolidWorks, 3D Exported

Automatic robot on the material hot press shaping equipment A fully automatic by the robot on the material hot press shaping equipment, first of all, to introduce the equipment of several modules, this equipment is divided into six module composition: 1.loading bin module, 2.jacking machine lifting module, 3.taking material mobile handling robot module, 4.rotating hot press module, 5.shaping under the material module, 6.out of the material conveyor belt module, the following is the principle of equipment function action Introduction: The function of the loading bin is mainly used for product switching and storage of products, this material frame can be stacked with 200 products, the bin is automatically switched between two groups of empty material to absorb material, products in the material frame by the top material lifter module for jacking operation, robot each take a piece of jacking machine again to jack a piece of material, take the material robot to absorb the product into the jig after the second positioning, and then into the hot pressing jig, hot pressing structure Automatic hot pressing for 3 seconds and then withdraw, hot pressing good production by the rotary cylinder rotation, the product into the bottom shaping jig, the product slide into the shaping structure for shaping, the product shaping time for 2 minutes, when the shaping is complete to suck out the product slide out of the slide, the product into the discharge conveyor belt for material, the above is this cell phone steel sheet on the material hot pressing shaping equipment all structural principles and functions Description, the structure of the equipment is mature and stable.